Product Description

JVCC CFL-5CA Copper Foil Tape is a 1 oz. rolled copper foil which provides excellent solderability and conformity. Used for RFI/EMI (electromagnetic interference/radio-frequency interference) shielding applications in the electrical/electronics industry (used to shield integrated circuit chips, cables and motors). CFL-5CA is coated with an acrylic adhesive which is uniformly dispersed with conductive spheres to provide a very low rate of electrical resistance through the tape (0.003 Ohms/square inch). Its conductive adhesive is ideal for printed circuit board modification, security-alarm circuit repairs, and prototype wiring-board layout and design. Also for cable wrapping to provide EMI/RFI shielding, seaming of EMI/RFI shielded rooms for electrical continuity, static charge draining and for surface contact to non-solderable materials (e.g. aluminum or plastics). Its aggressive acrylic adhesive system creates a superior bond. Annealed and non-tarnishing, bright copper color. Flammability: File #130121, UL 510, Section 4. Can also be used for decorative arts & crafts projects. Widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 6.3mm wide. This tape is typically cut to width from log rolls so most sizes ship on a plain white core.

---

Product Details

• Amazon Sales Rank: #1912 in Home Improvement
• Size: 1/4 in. x 36 yds. (6.3mm wide)
• Color: Copper
• Brand: J.V. Converting
• Dimensions: .30 pounds

Features

• Adhesive: conductive acrylic
• Backing/Carrier: copper foil
• Release Liner: 60# paper
• Certifications: File #130121, UL510, Section 4, MIL-T-47012
• Thickness: 3.5 mils (without liner) 2.1 mils (adhesive) 1.4 mils (carrier/backing)

---

Customer Reviews

Most helpful customer reviews

19 of 19 people found the following review helpful.
slug barrier
By DCat22
I used this to line the outside of my container garden. It works great for keeping out slugs and snails, and much cheaper than buying the short strips marketed for that purpose. (make sure to wear gloves...the edges are sharp)

17 of 17 people found the following review helpful.
I was sceptical about the 'conductive adhesive', but...
By W. Klaila
My project used 1" x 40" strips of conductive, carbon-impregnated, vinyl material for pressure sensors. I found the resistance of these strips to be inconsistent. Also, the resistance was much higher than I needed.
I ordered this tape with the hope that I could stick it on top of the strips and solve both my problems. I decided to try it because the tape claimed to have a conductive adhesive. I hoped that by simply taping the top side of a conductive vinyl strip, the copper would reduce the strips overall resistance and, hopefully, make the resistance consistent across the 100 strips used in my project. It would only work if the adhesive was conductive. It was! And it was very easy to apply.

8 of 8 people found the following review helpful.
It's copper, it's tape, and it works.
By The Overbobb
Well what can I say, it's copper tape. One side has excellent adhesion properties... And, on the other side copper... Great for arts and crafts, electronics, and hobbies. excellent for repairing broken traces on circuit boards.

See all 24 customer reviews...